Water Resources·Solved numerical

A curved gate AB, in the form of a quadrant of a circle with a 2 m radius, is positioned as shown in the figure below. The center of the circle, O, is 4 m below the free water surface. Find the horizontal and vertical components of the total force on the 2 m wide gate.

By September 21, 20252 min read
A curved gate AB, in the form of a quadrant of a circle with a 2 m radius, is positioned as shown in the figure below. The center of the circle, O, is 4 m below the free water surface. Find the horizontal and vertical components of the total force on the 2 m wide gate.

Problem Statement

A curved gate AB, in the form of a quadrant of a circle with a 2 m radius, is positioned as shown in the figure below. The center of the circle, O, is 4 m below the free water surface. Find the horizontal and vertical components of the total force on the 2 m wide gate.

Given Data

  • Radius of gate, \( R = 2 \, \text{m} \)
  • Width of gate, \( b = 2 \, \text{m} \)
  • Depth of water above center O = 4 m
  • Fluid is water, \( \rho = 1000 \, \text{kg/m}^3 \)

Diagram of the Gate

Diagram of a submerged quadrant gate

Solution

(i) Horizontal Force (\(F_x\))

The horizontal force is the total pressure on the vertical projection of the curved surface. This projection is a rectangle of height 2 m (the radius) and width 2 m.

$$ \text{Projected Area, } A_x = R \times b $$ $$ A_x = 2 \times 2 = 4 \, \text{m}^2 $$

The depth of the centroid of this projected area (\(\bar{h}_x\)) is found by locating the center of the 2m high rectangle. The top of this rectangle is 2 m below the surface, so its center is 1 m below that.

$$ \text{Depth to top of gate} = (\text{Depth to O}) - R = 4 - 2 = 2 \, \text{m} $$ $$ \bar{h}_x = (\text{Depth to top}) + \frac{R}{2} $$ $$ \bar{h}_x = 2 + \frac{2}{2} = 3 \, \text{m} $$

Now, we can calculate the horizontal force.

$$ F_x = \rho g A_x \bar{h}_x $$ $$ F_x = 1000 \times 9.81 \times 4 \times 3 $$ $$ F_x = 117720 \, \text{N} $$

(ii) Vertical Force (\(F_y\))

The vertical force is the weight of the water in the volume directly above the curved surface AB, extending to the free surface. As shown in the diagram, this volume can be split into two parts: a rectangular block and the circular quadrant below it.

$$ V_{rectangle} = (\text{Depth to top}) \times R \times b $$ $$ V_{rectangle} = 2 \times 2 \times 2 = 8 \, \text{m}^3 $$ $$ V_{quadrant} = \frac{\pi R^2}{4} \times b $$ $$ V_{quadrant} = \frac{\pi (2)^2}{4} \times 2 $$ $$ V_{quadrant} = 2\pi \approx 6.283 \, \text{m}^3 $$ $$ V_{total} = V_{rectangle} + V_{quadrant} $$ $$ V_{total} = 8 + 6.283 = 14.283 \, \text{m}^3 $$

Now, we can calculate the vertical force.

$$ F_y = \rho g V_{total} $$ $$ F_y = 1000 \times 9.81 \times 14.283 $$ $$ F_y \approx 140116 \, \text{N} $$
Final Results:

Horizontal Force: \( F_x \approx 117.72 \, \text{kN} \).

Vertical Force: \( F_y \approx 140.12 \, \text{kN} \).

Explanation of Concepts

Horizontal Component (\(F_x\)): The horizontal force on any curved surface is equal to the force on its vertical projection. For this gate, the projection is a simple rectangle. We calculate the force on this imaginary rectangle as we would for any flat vertical surface.

Vertical Component (\(F_y\)): The vertical force is equal to the weight of the fluid volume directly above the curved surface, extending up to the free surface. We find this total volume by summing the volume of the rectangular block of water above the gate and the volume of the water in the quadrant section itself.