Surveying·MCQ explained

The correction due to wrong alignment of the tape:

Try it first: pick an option, then read the explanation.

Correct answer: A. is always negative

Detailed Explanation: Correction for Wrong Alignment

When you measure a distance with a tape that's not perfectly on the straight line between two points, you're measuring a longer path than necessary. The measured length will always be greater than the true straight-line distance.

Diagram showing wrong alignment correction

Since a correction is what you add to the measured length to get the true length (True Length = Measured Length + Correction), and the true length is always shorter, the correction value must always be negative.

Formula and Concept

The error due to wrong alignment is always positive (the measured value is too large). The corresponding correction is therefore always negative.

  • Error due to wrong alignment = $$ \frac{h^2}{2L} $$
  • Correction due to wrong alignment = $$ -\frac{h^2}{2L} $$

Where:

  • L = Distance measured along the wrong alignment (hypotenuse)
  • l = True straight-line distance (base)
  • h = Error in alignment (offset distance)

Key Takeaway

An error is considered positive if the Measured Value > Actual Value. An error is considered negative if the Measured Value < Actual Value. In the case of wrong alignment, the measured value is always greater than the actual value, so the error is positive and the correction is negative.

Summary of Errors and Corrections

Error Due ToError SignCorrection Sign
Wrong AlignmentAlways +veAlways -ve
Standardization+ve or -ve-ve or +ve respectively
Temperature+ve or -ve-ve or +ve respectively
Pull+ve or -ve-ve or +ve respectively
SlopeAlways +veAlways -ve
SaggingAlways +veAlways -ve