Method used for chaining on sloping ground is _____:
Try it first: pick an option, then read the explanation.
The Challenge of Sloping Ground
In surveying, all distances are recorded as their true horizontal equivalent. Measuring directly along the surface of a slope gives the slope distance, which is always longer than the horizontal distance. To ensure an accurate survey map, special methods must be used to find this true horizontal length.
Detailed Analysis of Chaining Methods
There are two primary direct methods used to accurately measure horizontal distances on sloping terrain:
- A. By stepping method: This is a direct measurement technique. The chain is held strictly horizontally in short segments, and the measurement is transferred to the ground using a plumb bob. This creates a series of horizontal "steps" down the slope. It is very practical, especially for uneven or irregular slopes, but can be slow and requires skill.
- B. By hypotenusal allowance method: This is an indirect method. The surveyor first measures the distance along the slope. Then, the angle of the slope is measured (often with an instrument like a clinometer). A calculated correction, known as the "hypotenusal allowance," is physically added to the chain at the end, so that the arrow is placed at the correct horizontal distance mark.
- C. By Clinometer method: A clinometer is an instrument used to measure the angle of a slope. While it is essential for the hypotenusal allowance method and other indirect approaches, it is a tool for measurement, not a chaining method itself.
Comparison of Methods
| Method | Type | Best For | Key Characteristic |
|---|---|---|---|
| Stepping Method | Direct | Uneven, irregular slopes | Measures in short, horizontal segments. |
| Hypotenusal Allowance | Indirect | Uniform, smooth slopes | Measures along the slope and applies a calculated correction. |
Key Takeaway
Both the stepping method and the hypotenusal allowance method are standard, valid techniques for chaining on sloping ground to determine the true horizontal distance. Since both are correct, the most comprehensive answer is that both methods are used.
Home >MCQ >Surveying MCQs >MCQs on Chain Surveying (5)