Surveying·MCQ explained

In case of uniform slope, the contour lines:

Try it first: pick an option, then read the explanation.

Correct answer: C. Tend to parallel each other

Detailed Explanation: Contour Lines on a Uniform Slope

A uniform slope is one where the gradient is constant — every metre of horizontal distance corresponds to the same rise or fall in elevation. This uniformity has a direct and predictable effect on how contour lines appear on a map.

Why uniform slope produces parallel, equally-spaced contours:
On a uniform slope, the horizontal distance between consecutive contours (the horizontal equivalent) is constant throughout the slope. Since all contours are separated by the same horizontal distance and all run perpendicular to the slope direction, they must be parallel to each other. They are also equally spaced — hence the term “equidistant and parallel” for uniform slope contours.

Why the Other Options Are Wrong

A — Widely spaced: Wide spacing indicates a gentle slope, not necessarily a uniform one. A gentle slope can be uniform (widely and equally spaced) or non-uniform (varying spacing). Wide spacing alone does not define uniform slope.

B — Cross each other: Crossing contours only occur at caves or overhanging cliffs — never on a simple slope of any gradient.

D — Very close together: Close spacing indicates a steep slope. Again, a steep slope can be uniform (closely and equally spaced) or non-uniform. Close spacing alone does not define uniform slope.

Contour Spacing and Slope Type Summary

Slope type → contour appearance:
• Uniform slope → Parallel, equally spaced contours
• Gentle slope → Widely spaced contours
• Steep slope → Closely spaced contours
• Concave slope (getting gentler downhill) → Contours close at top, wide at bottom
• Convex slope (getting steeper downhill) → Contours wide at top, close at bottom

Key Concepts for Students

  • Uniform = equally spaced AND parallel: Both conditions hold together on a truly uniform slope. On an exam, if you see “parallel and equally spaced,” think uniform slope. If you see “parallel but unequally spaced,” that is a non-uniform slope in a consistent direction.
  • Option C says “tend to” — not “exactly”: The careful phrasing acknowledges that in practice, even nominally uniform slopes have slight variations. The phrase “tend to parallel” is technically more accurate than an absolute statement.
  • Distinguish gentle from uniform: A gentle slope has wide contour spacing but the spacing may vary (non-uniform). A uniform slope has equal spacing regardless of whether that spacing is wide or narrow. Uniform describes consistency; gentle/steep describes magnitude.