Which of the following features is shown by the parallel contour lines?
Try it first: pick an option, then read the explanation.
Correct answer: D. Uniform slope
Detailed Explanation: Parallel Contours and Uniform Slope
The arrangement of contour lines on a map encodes information about the shape, gradient, and uniformity of the ground surface. Parallel contour lines specifically indicate that the slope is constant and consistent across the mapped area.
Why parallel contours = uniform slope:A uniform slope has a constant gradient in one direction. Every contour at a fixed elevation interval is separated from its neighbours by the same horizontal distance (constant horizontal equivalent). Equal horizontal spacing means the contours are not only evenly spaced but also run in the same direction as each other — i.e., they are parallel. Parallel AND equally-spaced contours are the signature of a uniform, planar slope.
Why the Other Options Are Wrong
| Option | Why it is not described by parallel contours alone |
|---|---|
| A — Flat plains | A perfectly flat area has essentially no contour lines at all within its extent (all points are at the same elevation). Very gently undulating plains show widely-spaced but not necessarily parallel contours. |
| B — Hills | Hills produce closed, concentric contour loops — not parallel straight lines. The curves close around the summit, which is the opposite of a parallel arrangement. |
| C — Steep slope | A steep slope shows closely-spaced contours, but they need not be parallel. A curved steep face (e.g., a concave cliff) produces closely-spaced but curved, non-parallel contours. Closeness indicates steepness; parallelism indicates uniformity. |
Summary: Contour Pattern → Terrain Feature
| Contour pattern | Terrain feature |
|---|---|
| Parallel, equally spaced | Uniform slope |
| Parallel, widely spaced | Uniform gentle slope |
| Parallel, closely spaced | Uniform steep slope |
| Closed concentric loops (values increase inward) | Hill or peak |
| Closed concentric loops (values decrease inward) | Depression or pond |
| V-shapes pointing uphill | Valley or stream |
| U-shapes opening uphill | Ridge or spur |
Key Concepts for Students
- Parallel = uniform; spacing = steepness: These two properties are independent. Parallel contours always mean uniform slope; the spacing tells you whether the uniform slope is gentle (wide) or steep (close). You can have a uniformly steep slope (close and parallel) or a uniformly gentle slope (wide and parallel).
- Flat plain has no usable contours: If the ground is truly flat, all points are at the same elevation — so a single contour line would cover the entire area. In practice, flat areas are shown by widely-spaced contours or spot levels rather than a dense parallel pattern.
- Exam trap — confusing steep with uniform: Option C (steep slope) is tempting because closely-spaced contours often appear parallel. But steep does not imply uniform — a curved steep cliff has close but curved contours. Parallelism is the key indicator of uniformity.