Surveying·MCQ explained

In a section AA of the map, closely spaced contour lines represent:

Try it first: pick an option, then read the explanation.

Correct answer: A. Steep slope

Detailed Explanation: Closely Spaced Contours = Steep Slope

The horizontal distance between contour lines on a map — known as the horizontal equivalent (HE) — is a direct visual indicator of slope steepness. Understanding this relationship is fundamental to reading any topographic map.

The core relationship — spacing and steepness:
The contour interval (CI) is fixed for any given map. The horizontal equivalent (HE) between adjacent contours changes with slope:
• On a steep slope: a large elevation gain (CI) occurs over a short horizontal distance → small HE → contours are CLOSELY spaced
• On a gentle slope: the same elevation gain occurs over a much longer horizontal distance → large HE → contours are WIDELY spaced
In section AA, closely-spaced lines mean the terrain rises sharply — a steep slope.

Why the Other Options Are Wrong

B — Gentle slope: A gentle slope produces the opposite pattern — widely-spaced contours. This is the most common reversal error; remember closely-spaced = steep, widely-spaced = gentle.

C — Uniform slope: A uniform slope is shown by contours that are parallel and evenly spaced, not necessarily closely spaced. A uniform steep slope would be both closely-spaced and parallel, but "uniform" alone does not mean "closely spaced."

D — Flat terrain: Flat terrain has minimal elevation change over large horizontal distances, producing very widely-spaced (or absent) contours — the exact opposite of closely-spaced.

Key Concepts for Students

  • Memorise the inverse: close = steep, wide = gentle: Think of water flowing down a hillside. Where the slope is steepest, the elevation drops sharply in a short distance — so contours bunch together. Where the slope is gentle, elevation changes slowly over a long distance — so contours spread out. This physical intuition makes the rule impossible to forget.
  • Horizontal equivalent (HE) is the key variable: HE = CI / tan(slope angle). As slope angle increases, tan(angle) increases, so HE decreases — confirming that steeper slopes produce smaller HE (closer contours). At a 45° slope, HE = CI exactly. At 90° (vertical cliff), HE = 0 and contours theoretically merge.
  • Section AA context: A section (cross-section) of a map means you are reading a strip of contours along a specific cut line. The principle is the same: wherever the contours in that strip are closest together, the terrain along section AA is steepest at that point.