Surveying·MCQ explained

Two contours of different elevations cross each other on the map only when there is a/an:

Try it first: pick an option, then read the explanation.

Correct answer: D. Overhanging cliff

Detailed Explanation: When Contours of Different Elevations Cross

One of the fundamental properties of contour lines is that two contours of different elevations cannot cross each other on a normal topographic surface. However, there is one specific topographic exception: an overhanging cliff.

Why contours of different elevations cross at an overhanging cliff:
A standard contour map is a plan view — every point on the map has exactly one horizontal position (x, y) on the ground. On a normal slope, each (x, y) position on the map has exactly one elevation, so contours of different elevations never share the same horizontal position and therefore never cross.

An overhanging cliff changes this: because the rock face leans outward beyond the vertical, the same horizontal plan position (x, y) corresponds to two different elevations — one on the lower surface below the overhang and one on the upper surface above it. When projected vertically onto the plan, the contours of these two different elevations overlap and appear to cross. This makes overhanging cliffs the only terrain feature where two contours of different elevations intersect on the plan.

Contour Crossing Rules — Summary Table

FeatureContour behaviourSame or different elevations?
Vertical cliffContours merge into a single lineSame position; elevations do NOT cross
Overhanging cliffContours of different elevations CROSSDifferent elevations at same plan position
CaveContours of different elevations may appear to cross (if mapped in 2D)Similar to overhang but underground; typically shown separately or omitted
Normal slopeContours never crossN/A

Why the Other Options Are Wrong

A — Vertical cliff: On a vertical cliff, the ground rises exactly vertically — no part of the cliff extends outward beyond the base. All contour lines between the top and bottom elevations merge into a single vertical line on the plan; they do not cross each other. Contours touch (coincide) at the base of a vertical cliff, but contours of different elevations do not cross.

B — Uniform slope: A uniform slope produces parallel, evenly-spaced contours. There is no crossing of contours at all on a uniform slope.

C — Cave: A cave (horizontal void) is underground — its interior cannot be represented on a standard topographic surface map. While a cave entrance might cause a slight anomaly in contouring, the classic answer for two contours of different elevations crossing on a map is the overhanging cliff, not a cave. (Note: some older textbooks do include "cave" here; where the answer key specifically gives D, the overhanging cliff is the primary and most correct answer.)

Key Concepts for Students

  • Contours of the same elevation can merge (vertical cliff); different elevations can cross only at an overhang: Keep these two rules clearly separate. Merging = same elevation at the same location (vertical cliff). Crossing = different elevations at the same plan (x, y) position (overhanging cliff only).
  • Why overhangs are special — the projection principle: Topographic maps project all features vertically onto a horizontal datum plane. For ordinary terrain, each plan position maps to one ground point. An overhang violates this: one plan position corresponds to two ground elevations. The "impossible crossing" on the map is a signature that tells the map reader an overhang exists at that location.
  • Practical field implication: Survey instruments (levels, total stations) reading from below an overhang cannot directly observe the ground above the overhang at the same horizontal position. Separate survey setups are needed for the upper and lower surfaces — this is why overhanging terrain is among the most challenging to survey and map accurately.