Surveying·MCQ explained

Contours of hilly areas are best drawn by:

Try it first: pick an option, then read the explanation.

Correct answer: D. Tacheometric method

Detailed Explanation: Best Contouring Method for Hilly Areas

The selection of a contouring method depends on the terrain type, the extent of the area, and the accuracy required. Hilly terrain presents specific challenges — inaccessibility, steep slopes, and irregular surfaces — that make some methods impractical while making the tacheometric method the preferred choice.

Why tacheometric method is best for hilly terrain:
The tacheometric method (indirect contouring using a tacheometer or total station) allows the surveyor to locate numerous ground points rapidly from a single instrument station. The surveyor reads staff intercept, vertical angle, and horizontal angle for each point, then computes horizontal distance and elevation by tacheometric formulae:

D = KS cos²θ     HI = KS sinθ cosθ

where K = multiplying constant (usually 100), S = staff intercept, θ = vertical angle.

On hilly terrain, a single instrument station can command a wide area, covering ground that would be physically difficult or dangerous to traverse on foot for direct measurement. The radial lines of observation from each station are ideal for irregular, broken terrain.

Comparison of Contouring Methods for Hilly vs. Flat Terrain

MethodBest terrainHow contouring is doneWhy it fails in hills
Direct methodAny, but slowSurveyor physically walks along each contour line, locating exact contour pointsImpractical on steep/broken ground; dangerous and slow; contour tracing on foot is exhausting over large hilly areas
Cross-section methodFlat/gently rolling, strip surveysElevations taken along perpendicular cross-sections; contours interpolated betweenRequires traversing regular cross-sections at close intervals — impractical over large irregular hilly areas
Square (grid) methodFlat or gently undulating terrainGround is divided into a grid; spot elevations recorded at grid intersections; contours interpolatedLaying out a regular grid is difficult on steep or broken ground; method better suited to flat open areas
Tacheometric methodHilly / irregular terrainTacheometer at station, radial readings in all directions; elevations and distances computedNo drawbacks — single station covers wide hilly area without traversing difficult ground

Key Concepts for Students

  • Terrain type drives method choice: Flat → grid/square method; strip areas → cross-section method; hilly/inaccessible → tacheometric method; precise contour lines needed directly → direct method. This terrain-method pairing is a classic exam question pattern.
  • Tacheometry is the indirect contouring method par excellence: Tacheometry derives elevation and horizontal distance simultaneously from a single staff reading at each point. This makes it far faster than levelling-and-chaining (direct) for covering large areas of broken terrain from a single occupied point.
  • Direct method is most accurate but slowest: On the direct method, the surveyor physically traces the contour line across the ground — every staked point is exactly on the required contour. This gives the most accurate contour but is practical only for small areas or where high precision is essential (dam sites, reservoir surveys).