For a precise representation of the relief of a terrain, the contour interval should be:
Try it first: pick an option, then read the explanation.
Detailed Explanation: Contour Interval and Terrain Representation Precision
The contour interval (CI) determines how precisely a topographic map depicts the shape and elevation of the terrain. The choice of CI is a fundamental design decision in any topographic survey, directly trading accuracy against cost and map readability.
Why a small contour interval gives precise terrain representation:A smaller CI means contour lines are drawn at closer vertical intervals. This captures more elevation information per unit of terrain — subtle ridges, shallow valleys, gentle swales, and minor undulations that a larger CI would completely miss are all represented. In engineering work (dam design, irrigation channels, road alignment), missing a 0.5 m elevation feature can have significant design consequences. A small CI ensures these features appear on the map.
Effect of Contour Interval on Map Quality
| CI size | Effect on terrain representation | Practical implications |
|---|---|---|
| Small CI (e.g. 0.5 m, 1 m) | Many contours; fine detail captured; subtle features visible | More fieldwork required; map appears denser; best for precise engineering design |
| Large CI (e.g. 20 m, 50 m) | Few contours; only major features shown; small variations lost | Less fieldwork; map appears cleaner; suitable for small-scale reconnaissance |
Why the Other Options Are Wrong
A — Large CI: A large CI means fewer contours over the same terrain — minor features between consecutive contours are invisible on the map. A hill of 8 m height on a map with 10 m CI would not even appear as a single contour. Large CI gives a coarser, less precise representation, not a precise one.
B — Equal to horizontal equivalent: The horizontal equivalent (HE) is the plan distance between contours, which varies with slope. There is no basis for setting CI = HE — these are different types of quantities (CI is a vertical measure in metres; HE is a horizontal distance in metres on the ground or at map scale). This option is a distractor mixing two separate concepts.
C — Equal to scale of the map: The scale of a map (e.g. 1:1000) is a dimensionless ratio, not a length that can equal CI. CI is measured in metres; map scale is a ratio. These cannot be "equal" in any meaningful engineering sense.
Key Concepts for Students
- Smaller CI = more precision, more cost — always a trade-off: Reducing CI from 5 m to 1 m does not just increase the number of contours by 5× — it requires proportionally more surveying points in the field to locate those contours accurately. The choice of CI must balance the precision required for the project against the available survey time and budget.
- CI selection guidelines (general practice): Flat terrain: 0.1–0.5 m (very small CI needed to show any relief); gently rolling: 1–2 m; hilly: 5–10 m; mountainous: 20–50 m. Engineering design for structures always demands smaller CI than reconnaissance mapping for the same area.
- Small CI maps are harder to read: Ironically, while a small CI gives more information, too many closely-spaced contours can make a map visually cluttered and difficult to read quickly. In practice, index contours (every 5th or 10th contour drawn heavier with its elevation labelled) are used to maintain readability while preserving detail.