Which of the following is a type of contouring method that can be effectively used in a hilly terrain by setting radial lines?
Try it first: pick an option, then read the explanation.
Correct answer: C. Tacheometric method
Detailed Explanation: Tacheometric Contouring with Radial Lines
Contouring methods are broadly divided into direct (field teams physically locate contour points by trial) and indirect (spot levels are taken at arbitrary points, then contours are interpolated in the office). The tacheometric method is an indirect approach, and the use of radial lines is its defining field procedure.
How the tacheometric method uses radial lines:1. The tacheometer (or total station) is set up at a commanding central point with a wide view.
2. Radial lines are set out from this station in multiple directions (e.g., every 15° or 30° of bearing).
3. Staff readings are taken along each radial line at regular intervals (e.g., every 20–30 m).
4. The tacheometer simultaneously measures horizontal distance (from stadia hairs) and vertical angle — allowing elevation of each staff point to be computed optically without chaining.
5. Back in the office, contours are interpolated between the computed spot elevations.
Because physical chaining on steep hilly slopes is slow and error-prone, optical distance measurement via tacheometry makes this approach far more efficient than alternatives.
Comparison of Contouring Methods
| Method | Terrain suitability | Field procedure |
|---|---|---|
| Direct method (tracing) | Gentle, open terrain | Team physically walks the contour elevation, marking points with pegs |
| Method of squares (grid) | Flat to gently undulating | Grid staked on ground; levels taken at grid intersections |
| Cross-section method | Linear corridor (roads, railways) | Levels taken along cross-sections perpendicular to a baseline |
| Tacheometric method | Hilly / rugged terrain | Radial lines from one station; optical distance + vertical angle measurements |
Key Concepts for Students
- Radial lines = tacheometric contouring signature: Whenever a question mentions “radial lines” in the context of contouring, the answer is the tacheometric method without exception. No other method uses radial layout from a single instrument station.
- Tacheometry is the fastest indirect method in hilly areas: It avoids physical chaining, which is impractical on steep slopes. A single instrument station can cover a large area by rotating through radial directions, making it ideal for reconnaissance and topographic mapping.
- Indirect vs. direct: In indirect contouring (including tacheometry), contours are never physically located in the field — they are computed and drawn in the office by interpolation between spot levels. This is a key distinction from the direct (tracing) method.