For locating contours by indirect method, two guide points A (Elevation 600 m) and B (Elevation 610 m) are established. The horizontal distance between the two points on the plan is 1 cm. Find the distance of the contour of 605 m from point A (on the plan).
Try it first: pick an option, then read the explanation.
Correct answer: D. 0.5 cm
Detailed Explanation: Contour Interpolation by Proportional Distance
In the indirect method of contouring, spot levels are taken at known ground points, and contour positions are interpolated between them. The standard assumption is a uniform slope between any two adjacent guide points — this allows simple proportional (linear) interpolation to locate any contour elevation between them.
Fig: Linear interpolation places the 605 m contour exactly halfway between A and B on the plan.
Step-by-step calculation:Given:
• Elevation at A = 600 m
• Elevation at B = 610 m
• Total elevation difference = 610 − 600 = 10 m
• Total horizontal plan distance A to B = 1 cm
• Required contour elevation = 605 m
• Elevation rise from A to 605 m contour = 605 − 600 = 5 m
By linear interpolation (uniform slope assumed):
Distance from A = (Rise from A ÷ Total rise) × Total plan distance
Distance from A = (5 ÷ 10) × 1 cm = 0.5 × 1 cm = 0.5 cmWhy options B and C are wrong:
Options B (0.5 m) and C (1 m) are in metres, not centimetres. The question asks for the distance on the plan (map), which is in cm as given by the 1 cm plan distance. Mixing ground units (metres) with plan units (cm) is a common unit-confusion error.
Key Concepts for Students
- Interpolation formula: d = (h/H) × D — where h is the elevation rise from the lower point to the contour, H is the total elevation difference between the two guide points, and D is the plan distance between them. Memorise this ratio as it appears in multiple forms across exam questions.
- Uniform slope assumption: Linear interpolation only works if the slope between the two guide points is assumed uniform. In reality, slopes are irregular, so interpolation is an approximation. The closer the guide points, the better the approximation.
- Plan units vs. ground units: Always check whether the answer is in plan (map) units (cm, mm) or ground units (m). This question gives and asks in plan units (cm). Choosing 0.5 m or 1 m would be a unit error.