Surveying·MCQ explained

If g₁ = +1.2% and g₂ = −0.8% and rate of change of grade = 0.1% per 20 m chain, then the length of the vertical curve is:

Try it first: pick an option, then read the explanation.

Correct answer: B. 20 chains

Detailed Explanation: Length of a Vertical (Parabolic) Curve

Vertical curves connect two straight grade lines of different slope, providing a smooth, gradual transition. Their length is determined by the total grade change required and the design rate at which that change is permitted to occur, expressed per unit chain length.

g₁ = +1.2%g₂ = −0.8%Vertical curve (length L)L

Fig: A summit vertical curve connecting an ascending grade g₁ to a descending grade g₂.

Solution:
Step 1 — Total change of grade:
Total change = g₁ − g₂ = 1.2% − (−0.8%) = 1.2% + 0.8% = 2.0%

Step 2 — Length of vertical curve in chains:
Length (in chains) = Total change of grade ÷ Rate of change of grade
Length = 2.0% / 0.1% per chain = 20 chains

Why the Other Options Are Wrong

A — 10 chains: This would result from using only half the total grade change (e.g., 1.0% instead of 2.0%), perhaps from incorrectly averaging g₁ and g₂ instead of summing their magnitudes.

C — 30 chains: Overstates the length; could result from an incorrect rate value or an arithmetic error in the division.

D — 15 chains: Also inconsistent with the direct division of total grade change by rate of change — not matching the straightforward 2.0/0.1 = 20 calculation.

Key Concepts for Students

  • Total grade change = g₁ − g₂, always subtract algebraically: Since gradients carry sign (ascending positive, descending negative), always subtract g₂ from g₁ using their signed values — this correctly captures the full magnitude of grade change at a summit or valley curve.
  • Length in chains, not metres, unless converted: The rate of change is given "per chain," so the length naturally comes out in chains too — always check the units expected in the final answer and convert if the question asks for metres instead.
  • Summit vs. valley curves use the same length formula: Whether the vertical curve crests (summit, like this example) or dips (valley/sag), the length calculation from total grade change and design rate of change is identical — only the shape (Q23) and sight-distance design criteria differ between the two cases.