Surveying·MCQ explained

In a highway an ascending gradient of 1 in 100 meets with a descending gradient of 1 in 80, determine the deviation angle.

Try it first: pick an option, then read the explanation.

Correct answer: A. 9/400

Detailed Explanation: Deviation Angle at a Vertical Curve

The "deviation angle" N quantifies the total change in slope direction at the point where two grades meet — it is the algebraic counterpart of the "total change of grade" already used in Q12, here expressed as a gradient ratio instead of a percentage.

Solution:
Deviation angle N = g₁ − g₂ (using signed gradient values, ascending positive, descending negative)

Ascending gradient g₁ = 1/100
Descending gradient g₂ = −1/80 (negative, since it descends)

N = 1/100 − (−1/80) = 1/100 + 1/80

Finding a common denominator (LCM of 100 and 80 = 800):
1/100 = 8/800, and 1/80 = 10/800
N = 8/800 + 10/800 = 18/800

Simplifying (divide numerator and denominator by 2):
N = 9/400

Why the Other Options Are Wrong

B — 9/800: This is exactly half the correct value — likely from forgetting to simplify 18/800 fully, or from an error in the final division by 2.

C — 1/800: This drastically understates the deviation; possibly results from incorrectly subtracting instead of adding the two gradient fractions (treating both as positive and subtracting directly: 1/80−1/100=1/800).

D — 1/400: Also understates the result; may come from a partial or incomplete combination of the two gradient fractions.

Key Concepts for Students

  • Always assign signs before combining gradients: Ascending = positive, descending = negative. The deviation angle always adds the magnitudes of an ascending-then-descending (summit) pair, since N = g₁−g₂ = g₁+|g₂| when g₂ is negative.
  • Find a common denominator carefully: Fraction-based gradient problems (1 in X notation) require careful LCM-based addition — rushing this step is the most common source of arithmetic error in this question type.
  • Deviation angle drives vertical curve length and design: Just as the total percentage grade change (Q12) determines vertical curve length, this fractional deviation angle similarly determines the curve's required length and the rate of change of grade design criteria for highway vertical curves.