Surveying·MCQ explained

Degree of curve for 30 m chain will be:

Try it first: pick an option, then read the explanation.

Correct answer: C. 1718.9 / R

Detailed Explanation: Precise Degree-of-Curve Formula for a 30 m Chain

While Q11 used the commonly rounded value of 1720/R, this question asks for the more precise, derived constant — testing whether students understand where the rounded value actually comes from.

Deriving the formula:
The degree of curve D is the angle subtended at the centre by a chord of length c. Using the chord-length/circumference relationship:

c / D = (2πR) / 360°

Rearranging: D = (c × 360) / (2πR) = (180c) / (πR)

For c = 30 m:
D = (180 × 30) / (π × R) = 5400 / (πR) = 5400 / (3.14159 × R) ≈ 1718.9 / R

Why the Other Options Are Wrong

A — 1145.92/R: This is actually the corresponding precise constant for a 20 m chain (used in Q18: D = 1146/R, a rounded form of 1145.92/R) — not the 30 m chain value asked for here.

B — 1145.92 R: Besides using the wrong chain-length constant, this option also incorrectly multiplies by R instead of dividing — degree of curve must decrease as R increases (sharper curves have smaller radii and larger degree values), so an inverse (division) relationship is required, not direct multiplication.

D — 1718.9 R: Uses the correct 30 m chain constant but again incorrectly multiplies by R instead of dividing by it.

Key Concepts for Students

  • The constant depends entirely on chord length: 30 m chord → 1718.9/R (commonly rounded to 1720/R, Q11, Q19, Q21, Q26). 20 m chord → 1145.92/R (commonly rounded to 1146/R, Q18). Always check which chord/chain length convention the question specifies.
  • D must decrease as R increases — an inverse relationship: A very large radius (gentle curve) corresponds to a very small degree of curve, and a small radius (sharp curve) corresponds to a large degree of curve — this inverse relationship rules out any option that multiplies rather than divides by R.
  • 1718.9 derives directly from 5400/π: Recognising that 5400 = 180 × 30 (i.e., 180 × chord length) and dividing by π gives the precise constant — useful for re-deriving the formula for any non-standard chord length if needed.