Surveying·MCQ explained

Which of the following statements regarding an electronic theodolite fitted with a graduated circle encoded in an incremental system is INCORRECT?

Try it first: pick an option, then read the explanation.

Correct answer: B. Two photodiodes are placed perpendicular to each other over the graduated circle

Detailed Explanation: How an Incremental Encoder Reads the Theodolite Circle

Electronic theodolites replace the optical vernier with a digital angle encoder. The incremental encoding system is one of two common designs (the other being absolute encoding), and understanding its physical layout clarifies why option B is the incorrect statement.

Why "perpendicular" placement is incorrect:
In an incremental encoder system, the glass graduated circle carries thousands of fine, evenly spaced radial graduation lines. Two photodiode (light sensor) units are positioned to read this circle: one fixed relative to the instrument body, and one that moves with the telescope as it rotates. As the circle (or the moving sensor) rotates, light pulses are counted incrementally to determine the angle turned. For this counting system to work, the two photodiode sensor units must be aligned along the same line at the graduated circle (closely spaced or co-located relative to the circle's plane), not positioned perpendicular to each other — a perpendicular arrangement would not allow a consistent incremental pulse count to be derived from the same rotating circle.

Why the Other Statements Are Correct

A — Graduated circle is fixed: In most electronic theodolite designs, the glass graduated circle itself remains stationary; rotation is detected by the moving photodiode/sensor assembly attached to the telescope, not by physically rotating the glass circle.

C — One photodiode fixed, one moves with telescope: This is the core principle of incremental encoding — the relative motion between the fixed and moving sensor, both reading the same stationary graduated circle, generates the pulse train that is counted to determine angular rotation.

D — Graduated circle made of glass: Precision graduated circles in electronic theodolites are etched onto glass discs because glass provides a stable, temperature-resistant substrate for the fine line graduations needed for accurate encoding.

Key Concepts for Students

  • Incremental vs. absolute encoding: Incremental encoders count pulses as the instrument rotates (requiring an initial zero-reference reading), while absolute encoders can read the exact angle directly from a coded pattern at any instant, without needing a reference rotation first.
  • Why glass circles, not metal: Glass allows extremely fine, photo-etched graduation lines (down to micron precision) that metal scribing cannot achieve at the same resolution, enabling the 1-second least count seen in Q9.
  • Practical implication — powering on: Some incremental-encoder total stations require the operator to rotate the telescope through a small initial sweep after power-on, to establish the zero reference pulse before angle counting becomes valid — a quirk directly traceable to this encoding principle.