Surveying·MCQ explained

Which of the following statements regarding measurement of horizontal angles by theodolite are correct?
i. Errors due to adjustments of line of collimation and the trunnion axis are eliminated by taking both face readings.
ii. Errors due to eccentricity of verniers and centres are eliminated by taking both face readings.
iii. Closing the horizon is a process related to reiteration method of measurement of horizontal angle.
iv. In closing the horizon process, the sum of angles is taken. This sum must be equal to 540 degrees.

Try it first: pick an option, then read the explanation.

Correct answer: B. i and iii

Detailed Explanation: Face Readings and the Reiteration Method

This question combines two important error-elimination concepts in horizontal angle measurement: the double-face (face left/face right) observation technique, and the "closing the horizon" check used specifically in the reiteration method.

Statement-by-Statement Analysis

StatementVerdictExplanation
i. Both-face readings eliminate line of collimation and trunnion axis errors✔ TRUETaking one reading with the telescope normal (Face Left) and one after transiting (Face Right) and averaging the two cancels out errors caused by imperfect adjustment of the line of collimation and the trunnion axis, since these errors act with opposite sign in the two faces.
ii. Both-face readings eliminate eccentricity of verniers/centres✘ FALSEEccentricity errors (vernier eccentricity, centring eccentricity) are eliminated by taking readings at different parts of the graduated circle (the method of repetition, distributing settings around the circle) — not by face-left/face-right observation, which addresses a different class of instrumental error.
iii. Closing the horizon relates to the reiteration method✔ TRUEIn the reiteration (or "method of directions") technique, all angles around a station are measured in succession back to the starting point, and the final check is called "closing the horizon."
iv. Closing-the-horizon sum must equal 540°✘ FALSEThe sum of all angles measured all the way around a point back to the starting direction must equal exactly 360° (a full circle), not 540°.
Why the answer is i and iii:
Statement i correctly describes what face-left/face-right averaging eliminates (collimation and trunnion axis errors), and statement iii correctly identifies that "closing the horizon" belongs to the reiteration method. Statements ii and iv are both factually wrong — eccentricity is a separate error class, and the horizon must close to 360°, not 540°.

Key Concepts for Students

  • Match each elimination technique to its specific error: Face-left/face-right → collimation and trunnion axis errors. Repetition method (multiple settings around the circle) → eccentricity of centres/verniers and graduation errors. Mixing these up is a very common exam trap.
  • "Closing the horizon" always means returning to 360°: Whenever a question mentions a numeric closure target for a full swing around a point, the correct value is always 360° — any other number (540°, 720° without justification, etc.) should immediately be suspected as incorrect.
  • Reiteration is suited to many angles from one station: Unlike repetition (which refines a single angle through multiple settings), reiteration efficiently measures several different angles from the same station in one continuous sweep, checking overall consistency via the horizon closure.