Which of the following actions is NOT a permanent adjustment in case of transit theodolite?
Try it first: pick an option, then read the explanation.
Detailed Explanation: Centring Is a Temporary, Not Permanent, Adjustment
This question reinforces the temporary/permanent distinction introduced in Q20, applying it specifically to a list of theodolite adjustment actions. Recognising centring as the odd one out is the key skill being tested.
Why centring (option C) is NOT a permanent adjustment:“Bringing the vertical axis exactly over the station mark” is the definition of centring — a temporary adjustment performed fresh at every single field setup, using the plumb bob or optical plummet. It has nothing to do with the instrument's internal calibration; it is purely about correctly positioning the instrument over the ground point for that specific observation session.
Why the Other Three Are Genuine Permanent Adjustments
A — Telescope level axis parallel to line of collimation: This is a workshop-calibrated relationship between the telescope's bubble tube and its optical line of sight, fixed in the instrument's internal geometry — a true permanent adjustment.
B — Plate level axis perpendicular to vertical axis: As covered in Q4 and Q6, this relationship is set during manufacturing/calibration and does not need re-establishing at every setup — it is a permanent adjustment.
D — Horizontal axis perpendicular to vertical axis: Verified by the Spire test (Q38), this is also a fixed internal geometric relationship corrected through permanent adjustment, not redone at each station.
Key Concepts for Students
- The four classic temporary adjustments: Setting up, centring, levelling, and elimination of parallax (focusing) — see Q41 for their correct sequence. All four are repeated at every single station, unlike permanent adjustments.
- Permanent adjustments are about internal axis relationships: Anything phrased as "axis X must be perpendicular/parallel to axis Y" (where both axes are internal to the instrument) is a permanent adjustment, fixed by the manufacturer or technician, not by the field surveyor at each setup.
- Centring uses external reference points, not internal axes: Centring relates the instrument's position to an external ground mark — a fundamentally different kind of correction from aligning the instrument's own internal axes to one another.