Following are the data of an externally focusing telescope used for a tacheometric survey: Staff intercept is 1.52 m, interval between stadia hair is 5 mm, distance between vertical axis and objective is 120 mm, focal length of the objective is 0.3 m. The value of the multiplying constant is:
Try it first: pick an option, then read the explanation.
Detailed Explanation: Calculating the Multiplying Constant (K)
This is a direct application question testing whether students know exactly which two of the four given quantities are needed to find the multiplying constant — and which are irrelevant distractors.
Solution:The multiplying constant is defined as:
K = f / i
where f = focal length of the objective lens, and i = stadia hair interval.
Given: f = 0.3 m = 300 mm, i = 5 mm
K = 300 / 5 = 60
Why the Other Options Are Wrong
B — 24: This results from incorrectly using the distance d = 120 mm in the formula (e.g., 120/5 = 24), confusing the additive-constant component with the multiplying-constant formula.
C — 12.67: This results from dividing the staff intercept (1.52 m) by the hair interval in some unit-inconsistent way — staff intercept plays no role in computing K, which is purely an instrument property, not a field reading.
D — 2.5: This results from a units error, such as dividing 0.3 m directly by 120 mm without converting consistently, or confusing f with d.
Key Concepts for Students
- K depends only on f and i — nothing else: Among the four data points given (staff intercept, hair interval, distance d, focal length f), only i and f are needed for K. Staff intercept (S) is a field observation used later in D = KS + C, and d is needed only for the additive constant C = f + d, not for K.
- Always convert to consistent units first: f = 0.3 m must be converted to 300 mm to divide cleanly by i = 5 mm. Mixing metres and millimetres without conversion is the most common source of error in this calculation.
- Use this to cross-check anallactic claims: If a problem states K = 100 (the design target for most tacheometers, see Q42 and Q53), you can verify it directly from f and i using this same formula before trusting the given value.