Geotechnical·MCQ explained

The three phase diagram of the partially saturated soil sample is given in the figure. Determine the degree of saturation of the soil.

Try it first: pick an option, then read the explanation.

Correct answer: B. 0.63

Detailed Explanation

Given (read from the three-phase volume diagram):

  • Volume of water, Vw = 0.15
  • Volume of voids, Vv = 0.2349

Degree of saturation is defined as the fraction of the void space that is occupied by water:

S = Vw / Vv = 0.15 / 0.2349 = 0.6386 ≈ 0.63

Because S is between 0 and 1 (neither fully dry nor fully saturated), this confirms the soil sample is indeed partially saturated, exactly as stated in the problem — air still occupies the remaining void volume, Va = Vv − Vw = 0.2349 − 0.15 = 0.0849.

VOLUMEAirWaterVw = 0.15SolidVv0.2349

Three-phase (volume) diagram for the partially saturated sample, showing the given volume of water (Vw) within the total void volume (Vv).

Key Concepts for Students

  • Degree of saturation, S = Vw/Vv: always read the water volume as a fraction of the total void volume, not the total sample volume.
  • Void volume splits into air and water: Vv = Va + Vw; once S and Vv are known, Va follows directly.
  • S is dimensionless and expressed either as a decimal (0 to 1) or a percentage (0% to 100%).
  • For a partially saturated soil, both S and the air content ac = 1 − S are needed to fully describe how the void space is shared between air and water.