Textural classification of soil is based on:
Try it first: pick an option, then read the explanation.
Detailed Explanation
Soil can be classified by several fundamentally different systems, each built around a different set of criteria. Textural classification is the simplest and oldest of these approaches.
Why "grain size only" Is Correct
Textural classification systems (such as the USDA textural triangle) classify soil purely based on the relative percentages of gravel, sand, silt, and clay it contains — grain size alone, with no reference to plasticity or consistency limits at all.
Why the Other Options Are Wrong
- grain size and consistency limits: overstates textural classification's inputs — consistency limits (Atterberg limits) are not used in a purely textural system at all.
- consistency limits only: backwards — textural classification uses grain size, not plasticity/consistency limits, as its basis.
- plasticity index: belongs to engineering classification systems like USCS (see Q3's Going Deeper), not textural classification, which predates and ignores plasticity entirely.
Key Point
Textural classification = grain size percentages only. Engineering classification (USCS, AASHTO) = grain size PLUS plasticity/consistency limits — this distinction is the whole answer to this question.
Key Concepts for Students
- Textural classification (e.g., USDA soil texture triangle) is widely used in agriculture and soil science, less so in geotechnical engineering design.
- USCS and AASHTO, by contrast, both incorporate plasticity index and liquid limit alongside grain size — making them "engineering" classification systems rather than purely textural ones.
- A soil textural name (like "loam," see Q13) can be assigned from grain-size percentages alone, without ever running a liquid limit or plastic limit test.
- This distinction — grain size only vs. grain size + plasticity — is the conceptual dividing line covered in more depth in the Going Deeper section below.
Going Deeper: Textural vs. Engineering Classification Systems
Soil classification systems broadly split into two philosophies: those based purely on particle-size composition (textural systems), and those that add plasticity behaviour on top of particle size (engineering systems).
| System | Basis | Typical Use |
|---|---|---|
| Textural (e.g. USDA triangle) | Grain size percentages only (gravel/sand/silt/clay) | Agriculture, soil science, general soil description |
| USCS (Unified Soil Classification System) | Grain size + Atterberg limits (via the A-line/plasticity chart) | Geotechnical engineering design, worldwide |
| AASHTO | Grain size + Atterberg limits, with a different grouping logic | Highway/pavement subgrade evaluation |
Both USCS and AASHTO use largely the same raw test data (sieve analysis and Atterberg limits) but organize and weight it differently, since they were developed for different purposes — USCS for general geotechnical engineering (airfields, dams, foundations), and AASHTO specifically for rating soils as highway subgrade material. This topic focuses primarily on USCS, since it is the more widely used system in general geotechnical practice and the basis for the Indian Standard classification (IS: 1498-1970, see Q16).