Surveying·MCQ explained

Plumb bob lines at two different places in plane surveying are ........

Try it first: pick an option, then read the explanation.

Correct answer: C. parallel to each other
Home >MCQ >Surveying MCQs >MCQs on Land Surveying – Basic Principal and Classification(4)

Understanding the Assumptions of Surveying

The core of this question lies in the fundamental difference between the two main types of surveying: Plane Surveying and Geodetic Surveying. A plumb bob line simply indicates the direction of gravity, which is the "vertical" direction at any point.

  • Plane Surveying assumes the Earth's surface is a flat plane. This is a simplification that works well for small areas.
  • Geodetic Surveying takes into account the true spheroidal shape (curvature) of the Earth. This is necessary for large-scale projects like mapping countries.

Detailed Analysis of the Options

C. parallel to each other

This is the correct answer. In plane surveying, the Earth is treated as a flat surface. On a flat plane, all vertical lines (lines of gravity indicated by plumb bobs) are considered to be perfectly parallel to one another. This assumption simplifies calculations significantly and is accurate enough for projects covering small areas (typically less than 250 sq km).

A. cut at the center of the earth

This is incorrect for plane surveying, but it is the correct concept for geodetic surveying. Because the Earth is a sphere, the lines of gravity are not truly parallel; they all converge and would intersect at the Earth's center. Plane surveying deliberately ignores this fact for simplicity.

B. inclined

This is incorrect. A plumb line, by definition, establishes the vertical direction at a point. It is the reference against which other lines might be considered "inclined".

D. Perpendicular to each other

This is incorrect. Two vertical lines on the Earth's surface can't be perpendicular to each other in this context. They are either treated as parallel (plane surveying) or converging (geodetic surveying).

Summary: Plane vs. Geodetic Surveying

FeaturePlane SurveyingGeodetic Surveying
Earth's ShapeConsidered a flat planeConsidered a spheroid (curved)
Plumb LinesAssumed to be parallelConverge at Earth's center
Suitable AreaSmall areas (< 250 km²)Large areas (> 250 km²)
AccuracyLess accurateHighly accurate

Study Tips

  • Plane = Parallel: The two 'P's go together. In Plane surveying, plumb lines are Parallel.
  • Geodetic = Globe: Think of a globe. If you hang two strings from the top and bottom, they point towards the center. That's Geodetic surveying on a Globe.
  • The key is the assumption: Always ask "Does this type of surveying assume a flat or a curved Earth?" The answer to that question will lead you to the correct properties of plumb lines.
Home >MCQ >Surveying MCQs >MCQs on Land Surveying – Basic Principal and Classification(4)