Home/MCQ Practice/Surveying MCQs/Land Surveying

Surveying·MCQ practice

MCQs on Land Surveying – Set 4

25 questions. Tap an option to check it instantly, then read the solution.

Question 1Medium
Which of the following scales is the smallest one?
Full explanation

Answer: D. 1 cm = 5000 m

To compare, convert all to RF:
A. 1 cm = 50 m = 5000 cm => RF = 1/5000
B. RF = 1/50000
C. 4:200000 => 1:50000 => RF = 1/50000
D. 1 cm = 5000 m = 500000 cm => RF = 1/500000
The smallest scale has the largest denominator. 1/500000 is the smallest fraction.

Question 2Easy
On a rough terrain, what is the achievable accuracy of a chain under conductive conditions?
Full explanation

Answer: B. 1 in 250

For chaining on rough or hilly terrain, the expected degree of accuracy is lower than on flat ground. A standard achievable accuracy under these conditions is about 1 in 250.

Question 3Easy
If the smallest division of a Vernier is longer than the smallest division of its primary scale, the Vernier is known as...........
Full explanation

Answer: D. Retrograde Vernier

In a retrograde vernier, the vernier scale divisions are slightly larger than the main scale divisions, and the scale is numbered in the opposite direction. This is in contrast to a direct vernier where the vernier divisions are smaller.

Question 4Easy
The scale in which three successive dimensions can be measured at a time is called _____.
Full explanation

Answer: B. diagonal scale

A diagonal scale allows for measurements in three dimensions (e.g., meters, decimeters, and centimeters) by using a combination of horizontal, vertical, and diagonal lines. A plain scale measures two dimensions.

Question 5Easy
Plumb bob lines at two different places in plane surveying are ........
Full explanation

Answer: C. parallel to each other

In plane surveying, the Earth's surface is considered a flat plane. Therefore, lines of gravity (represented by plumb bob lines) at different points are assumed to be parallel to each other. In geodetic surveying, they would converge at the Earth's center.

Question 6Easy
Hydrographic survey deals with the mapping of .........
Full explanation

Answer: A. Large water bodies

Hydrographic surveying is the branch of surveying that deals with measuring and describing the physical features of oceans, seas, coastal areas, lakes, and rivers, primarily for the purpose of navigation and other marine activities.

Question 7Medium
What is the difference between the sum of interior angles of a plane triangle and a spherical triangle for an area of 195 square kilometers on the Earth's surface?
Full explanation

Answer: C. one second

The sum of angles in a plane triangle is always 180°. For a spherical triangle, the sum is greater than 180°. The difference, known as spherical excess, is approximately one second of arc for every 195 square kilometers of area.

Question 8Easy
Which of the following statements in respect of a map A having scale 1:1000 and another map B having scale 1:5000 is true?
Full explanation

Answer: A. Map A is a large scale map compared to map B.

A larger scale has a smaller denominator. Since 1000 is smaller than 5000, the scale 1:1000 is larger than 1:5000. Large-scale maps cover smaller areas but show more detail.

Question 9Easy
Which of the following scales of the map is not affected due to the shrinking of the map?
Full explanation

Answer: B. Graphical scale

A graphical scale (or bar scale) is a line drawn on the map that is subdivided to show map distances. If the map shrinks or expands, the graphical scale shrinks or expands proportionally. Therefore, measurements made with it remain accurate. Numerical scales like RF or an engineer's scale become incorrect.

Question 10Easy
In geodetic surveying, the sum of all the internal angles (degree) of a spherical triangle should be ........
Full explanation

Answer: C. greater than 180

Due to the curvature of the Earth, a triangle drawn on its surface (a spherical triangle) has angles that sum to more than 180 degrees. The larger the area of the triangle, the greater the sum of its angles will be.

Question 11Easy
Which of the following is made in connection with the construction of streets, water supply systems, sewers?

Answer: D. City surveying

City surveying is specifically for the planning and construction of infrastructure within urban areas, such as streets, water supply, and sewer systems.

Question 12Easy
Which of the following is a classification based on the instrument used?

Answer: D. Traverse surveying

Traverse surveying is a method that involves measuring both linear and angular measurements, typically using instruments like a theodolite or total station. The other options are classified by purpose.

Question 13Easy
Determining points of strategic importance are called _______

Answer: C. Military surveying

Military surveying is conducted to determine points of strategic military importance for defense and operational planning.

Question 14Easy
For exploring mineral wealth which type of surveying is used?

Answer: D. Mine surveying

Mine surveying is a specialized branch used for the exploration and management of mineral deposits, both on the surface and underground.

Question 15Easy
Determining quantities or affording sufficient data for the designing of works such as roads and reservoirs is called _______

Answer: B. Engineering surveying

Engineering surveying involves collecting data for the design, planning, and execution of engineering projects like roads, bridges, and reservoirs.

Question 16Easy
What consists of a horizontal and vertical location of certain points by linear and angular measurements and is made to determine the natural features of a country such as rivers, streams?

Answer: A. Topographic surveying

Topographic surveys are conducted to map the natural and man-made features of the land, including its elevation and contours, to create a detailed topographic map.

Question 17Medium
Which of the following is a classification based on the nature of the field survey?

Answer: A. Topographic surveying

Surveys can be classified based on the nature of the field: land, marine, or astronomical. Topographic surveying is a type of land survey.

Question 18Medium
Which of the following is not a classification based on instruments used or methods employed?

Answer: B. Topographic surveying

Topographic surveying is classified based on the purpose of the survey, not the specific instrument used. The others are named after the method or primary instrument.

Question 19Easy
A survey which deals with bodies of water for the purpose of navigation, water supply, harbor works or for the determination of mean sea level is ________

Answer: B. Hydrographic surveying

Hydrographic surveying is the science of measuring and describing features that affect maritime navigation, marine construction, dredging, and related activities.

Question 20Medium
Which of the following is not a method of measuring the distances directly?

Answer: D. Measurement with theodolite

A theodolite is an instrument for measuring angles. Distances are either measured separately (e.g., with a tape) or calculated indirectly using trigonometry, not measured directly by the theodolite itself (unless it's a total station with an integrated EDM).

Question 21Easy
In which method are distance measurements chiefly confined to preliminary surveys and explorations for a rough survey?

Answer: B. Pacing

Pacing, or counting steps, is a quick but rough method of estimating distances, making it suitable for preliminary surveys where high accuracy is not required.

Question 22Easy
An instrument shaped like a watch that is carried in a pocket or attached to one leg to count paces is known as a _______

Answer: C. Passometer

A passometer is a simple device that registers the number of paces taken by the person carrying it.

Question 23Easy
Which instrument registers the total distance covered by adjusting it to the length of the user's pace?

Answer: B. Pedometer

A pedometer is similar to a passometer but is more advanced. It can be set to the user's pace length and will then register the total distance traveled, not just the number of steps.

Question 24Easy
An instrument for registering the number of revolutions of a wheel is a(n) _____

Answer: A. Odometer

An odometer is attached to the wheel of a vehicle or a measuring wheel to record the distance traveled by counting the wheel's revolutions.

Question 25Easy
Pacing is most difficult in _______

Answer: C. Rough ground

Maintaining a consistent pace length is very difficult on rough, uneven, or steep terrain, which introduces significant inaccuracies into the measurement.