Surveying·MCQ explained

During the alignment of a road by using direct ranging, the surveyor raises both the hands above his head and then, brings them down as a signal for his assistant. The correct action taken by his assistant would be _______.

Try it first: pick an option, then read the explanation.

Correct answer: A. considering that the ranging rod is at correct position

Detailed Explanation: Understanding Ranging Signals in Surveying

Direct Ranging is a fundamental surveying procedure used to establish intermediate points along a straight line between two terminal points that are intervisible (visible to each other). Effective communication between the surveyor at the instrument and the assistant holding the ranging rod is crucial for accuracy. This is achieved through a standardized set of hand signals.

Analysis of the Signal

The signal described in the question — the surveyor raising both hands above the head and then bringing them down — is the universally accepted signal for "Correct" or "In Line." It indicates that the assistant has positioned the ranging rod perfectly on the survey line. Upon seeing this signal, the assistant's job is to understand that the position is correct and wait for the next instruction, which is typically to fix the rod in place.

Common Hand Signals in Ranging

Here is a comprehensive table of standard hand signals used during ranging operations:

Signal by the SurveyorAction by the Assistant
Rapid sweep with right handMove considerably to the right
Slow sweep with right handMove slowly to the right
Right arm extendedContinue to move to the right
Right arm up and moved to the rightPlumb the rod to the right
Rapid sweep with left handMove considerably to the left
Slow sweep with left handMove slowly to the left
Left arm extendedContinue to move to the left
Left arm up and moved to the leftPlumb the rod to the left
Both hands above head and then brought downCorrect
Both arms extended forward horizontally and hands depressed brisklyFix the rod

Key Concepts for Students

  • Clarity in Communication: Standardized hand signals eliminate ambiguity and ensure precision in surveying, especially over long distances where shouting is impractical.
  • Importance of Plumbness: Note the specific signals for "Plumb the rod." A ranging rod that is not held perfectly vertical will introduce errors in the alignment. The surveyor checks for verticality after getting the rod on the line.
  • Efficiency: Knowing these signals allows the survey team to work quickly and efficiently, saving time and reducing the potential for errors. The process involves getting the rod approximately on line with wide sweeps, making finer adjustments with slow sweeps, checking for plumbness, and finally confirming the correct position.