Point of tangency is the...
Try it first: pick an option, then read the explanation.
Detailed Explanation: Point of Tangency (PT) Defined
Every simple circular curve has two clearly named end points where it connects to the adjoining straight tangent lines. Knowing the exact terminology and which point is which is fundamental to reading and communicating curve-setting field data correctly.
Fig: PC marks where the straight tangent ends and the curve begins; PT marks where the curve ends and the next straight tangent begins.
Why "End of the curve" is correct:The Point of Tangency (PT) is the point where the circular curve smoothly transitions back into the forward straight tangent — in other words, it is the end point of the curve. Its counterpart, the Point of Curvature (PC), is the corresponding beginning point, where the rear straight tangent ends and the circular curve begins.
Key Curve Terminology
| Term | Abbreviation | Meaning |
|---|---|---|
| Point of Curvature | PC | Beginning of the curve (where the back tangent ends) |
| Point of Tangency | PT | End of the curve (where the forward tangent begins) |
| Point of Intersection | PI / Apex | The point where the two straight tangents would meet if extended (not actually on the curve) |
Why the Other Options Are Wrong
A — Beginning of the curve: This describes the Point of Curvature (PC), not the Point of Tangency — the two terms refer to opposite ends of the same curve.
C — Common point where the radius changes: This describes the connecting point on a compound curve (where one circular arc of a given radius transitions to another arc of a different radius) — not the PT, which connects a circular arc to a straight (infinite-radius) tangent.
D — Common point where radius and direction change: Similarly describes a compound or reverse curve's junction point, not the simple circular curve's PT.
Key Concepts for Students
- PC = start, PT = end — an easy mnemonic: "Curvature" comes before "Tangency" alphabetically and chronologically along the route — the curve begins at the point of CURVATURE and ends at the point of TANGENCY (returning the route to a straight, tangent path).
- PI (apex) is NOT on the curve itself: The point of intersection is the theoretical meeting point of the two straight tangents extended beyond the curve — it is used for calculation purposes (tangent length, apex distance) but the actual curve never physically passes through it.
- This terminology underlies the entire question set: PC, PT, and PI (apex) are referenced throughout curve-setting calculations (tangent length from PI to PC/PT, apex distance from PI to curve midpoint in Q19, deflection angles measured from PC in Q9) — mastering this vocabulary is foundational to the whole topic.