The process of turning the telescope in the theodolite in vertical plane through 180 degrees about the trunnion axis, is called:
Try it first: pick an option, then read the explanation.
Detailed Explanation: Transiting (Plunging) the Telescope
This is a definitional question distinguishing the specific 180° vertical-plane reversal manoeuvre from other named theodolite operations that sound superficially similar.
Why "Transiting" is the correct term:Transiting — also called plunging or reversing the telescope — is the process of rotating the telescope through exactly 180° in the vertical plane about the horizontal (trunnion) axis. This flips the telescope from pointing in one direction to pointing in the exact opposite direction while staying mounted at the same station, and is the basis of taking "face left" and "face right" observations to cancel out collimation-type instrumental errors.
Distinguishing the Four Named Operations
| Term | What it means | Axis/plane involved |
|---|---|---|
| Transiting | 180° telescope reversal in the vertical plane | About the horizontal (trunnion) axis |
| Swinging | Rotating the telescope in the horizontal plane (see Q33) | About the vertical axis |
| Centring | Positioning the instrument exactly over the ground station mark | No rotation involved — a positioning adjustment |
| Levelling | Adjusting foot-screws so the vertical axis is truly vertical | No rotation involved — a levelling adjustment |
Why the Other Options Are Wrong
A — Swinging: Swinging rotates the telescope in the horizontal plane (about the vertical axis), not the vertical plane about the trunnion axis — the two motions are perpendicular to each other.
B — Centring: Centring is a positioning adjustment (placing the instrument over the ground mark), entirely unrelated to rotating the telescope.
D — Levelling: Levelling adjusts the foot-screws to make the vertical axis vertical — again, no telescope rotation about the trunnion axis is involved.
Key Concepts for Students
- Transiting enables face-left/face-right observations: By transiting the telescope between two consecutive readings of the same target, errors due to imperfect collimation and trunnion axis adjustment are largely cancelled when the two readings are averaged (see Q4, Q15, Q50).
- Swinging vs. transiting — perpendicular planes: Swinging changes the horizontal direction the telescope points; transiting flips it vertically while staying pointed in roughly the same horizontal direction (or its exact reciprocal once also swung 180° horizontally for a true "face right" sight on the same target).
- "Plunging" and "reversing" are synonyms for transiting: Different textbooks may use any of these three terms interchangeably for the same 180° vertical-plane telescope rotation — recognising all three avoids confusion across sources.