A series of closed contour lines on the map with lower to higher value inside them, represents a:
Try it first: pick an option, then read the explanation.
Detailed Explanation: Closed Contours with Increasing Values Inward = Hill
Closed contour lines form loops that completely enclose an area. The direction in which the contour values change as you move inward immediately tells you whether you are looking at a hill or a depression.
Fig: Hill (left) — contour values increase toward the centre. Depression (right) — contour values decrease toward the centre.
The one-rule identification test:• Closed contours with values increasing inward (higher inside) = Hill or peak
• Closed contours with values decreasing inward (lower inside) = Depression, pond, or hollow
This question states “lower to higher value inside,” meaning the innermost contour has the highest value — so this is a hill.
Why the Other Options Are Wrong
B — Ridge: A ridge is an elongated high feature, but its contours are not closed concentric loops — they are U-shapes that open downslope. Ridges do not produce the concentric closed pattern described.
C — Depression: A depression would show the opposite pattern — values decrease inward. Depressions are also often marked with hachures (inward-pointing tick marks) to distinguish them from hills.
D — Steep slope: A steep slope is shown by closely-spaced contours, which need not be closed loops at all. Closed loops are specific to isolated high or low features, not slopes.
Key Concepts for Students
- Increasing inward = hill; decreasing inward = depression: This single rule answers every “what does this contour pattern represent?” question for closed loops. Commit it to memory as a paired fact.
- Hachures distinguish depression from hill: On printed topographic maps, closed depression contours carry small tick marks (hachures) pointing toward the centre (lower ground). Hill contours have no such marks. When values are not printed, hachures are the only visual clue.
- Ridge vs. hill distinction: A hill has concentric closed contours centred on a summit. A ridge has elongated, parallel U-shaped contours along a crest. A hill is a point feature; a ridge is a linear feature.