The vertical distance between consecutive contours is called:
Try it first: pick an option, then read the explanation.
Correct answer: C. Contour interval
Detailed Explanation: Definition of Contour Interval
This question asks for the correct terminology for the vertical separation between consecutive contour lines. In surveying, precision of language is as important as precision of measurement — using the right term for the right quantity is essential.
Contour interval (CI) — definition:The contour interval is the constant vertical (elevation) difference between any two adjacent contour lines on a topographic map. It is fixed by the surveyor before fieldwork begins and is the same for every pair of consecutive contours across the entire map. For example, if contours are drawn at 100 m, 102 m, 104 m, 106 m … the CI is 2 m.
Why the Other Options Are Wrong
| Option | Correct definition of that term | Why it is not the answer |
|---|---|---|
| A — Horizontal equivalent | The horizontal map distance between two consecutive contour lines | HE is a horizontal measurement; it varies with slope steepness and is NOT fixed across the map |
| B — Slope distance | The actual ground distance measured along the inclined surface between two contour points | Slope distance includes both vertical and horizontal components — it is longer than either CI or HE alone |
| D — Reduced level | The elevation of a single point above or below the adopted datum | RL refers to the absolute elevation of one point; CI is the difference between two consecutive contours, not the elevation of a single contour |
Three Distances Associated with Contours
| Term | What it measures | Fixed or variable? |
|---|---|---|
| Contour interval (CI) | Vertical elevation between consecutive contours | Fixed (same everywhere on the map) |
| Horizontal equivalent (HE) | Horizontal map distance between consecutive contours | Variable (depends on slope steepness) |
| Slope distance | Actual inclined distance between points on two consecutive contours | Variable (depends on slope angle) |
Key Concepts for Students
- CI is fixed; HE is variable: This pair is tested repeatedly. The CI is a design choice made before surveying — it is the same for every pair of adjacent contours. The HE is a result — it depends on local slope angle and changes across the map. Never confuse these two terms.
- CI selection factors: The CI is chosen based on the scale of the map (larger scale → smaller CI for more detail), the purpose of the survey (engineering design needs small CI; route location needs larger CI), the nature of terrain (flat ground needs small CI to show micro-relief; hilly terrain tolerates larger CI), and time and cost constraints.
- Formula relating CI, HE, and slope: tan(slope angle) = CI / HE. If any two of these three quantities are known, the third can be calculated. This formula is frequently used in practical problems.