Surveying·MCQ explained

Closely spaced contours indicate:

Try it first: pick an option, then read the explanation.

Correct answer: A. Steep slope

Detailed Explanation: Closely Spaced Contours and Slope Steepness

The visual spacing of contour lines on a map is one of the most immediate and useful pieces of information a topographic map communicates. The rule is simple and geometric: the closer the contours, the steeper the ground.

The geometric reason — why close spacing = steep:
On a map, contour lines are drawn at fixed elevation intervals (the contour interval, CI). The horizontal distance between adjacent contours (horizontal equivalent, HE) depends on the slope:

HE = CI ÷ tan(slope angle)

As the slope angle increases, tan(slope angle) increases, so HE decreases. A small HE means the contours are close together. Therefore, steep slopes produce closely-spaced contours. On a near-vertical cliff, HE approaches zero and contours nearly merge.

Why the Other Options Are Wrong

B — Gentle slope: A gentle slope means a small elevation change over a large horizontal distance — large HE — so contours are widely spaced, not closely spaced. This is the direct opposite of the correct answer.

C — Flat terrain: Flat terrain has essentially zero slope angle. With zero slope, HE approaches infinity — contours are extremely far apart or absent entirely. This is the most widely-spaced scenario possible.

D — Uniform slope: A uniform slope means the slope angle is constant in one direction; it is indicated by parallel and evenly-spaced contours. Close spacing alone does not indicate uniformity — it only indicates steepness. A closely-spaced but non-parallel (curved) contour pattern shows a steep but non-uniform slope.

Key Concepts for Students

  • Spacing = steepness; uniformity = parallelism: These are two independent properties. Close spacing tells you the slope is steep; parallel arrangement tells you the slope is uniform. A steep and uniform slope has contours that are both closely-spaced AND parallel. Never conflate the two.
  • The extremes make the rule obvious: At 90° (vertical cliff) the HE = 0, so all contours pile onto one line. At 0° (flat ground) the HE is infinite, so no contours appear. Everything in between follows proportionally from the formula HE = CI / tan(angle).
  • Practical reading application: When using a topo map for route planning, avoid areas with closely-spaced contours (steep) and prefer widely-spaced areas (gentle). Road engineers route alignments away from closely-spaced contour zones to minimise cut/fill quantities — recognising contour spacing is a foundational map-reading skill.