Surveying·MCQ explained

Two contours intersect each other in the case of:

Try it first: pick an option, then read the explanation.

Correct answer: B. Overhanging cliff

Detailed Explanation: Contour Intersection at an Overhanging Cliff

On a standard topographic surface, contour lines of different elevations never intersect because each horizontal plan position (x, y) has only one elevation. An overhanging cliff is the unique terrain feature that violates this assumption and causes contours to cross on the plan.

Why contours cross at an overhanging cliff — and nowhere else:
An overhanging cliff leans outward beyond the vertical. This means the same (x, y) plan position corresponds to two distinct elevations: one at the lower surface below the overhang and one at the upper surface above it. When these two ground points (at different elevations) are projected vertically onto the plan, two different contour lines — one for each elevation — plot at exactly the same plan position and therefore appear to cross.

A vertical cliff, by contrast, has no overhang — the face is exactly vertical. All elevations between the cliff top and base project to the same plan line, causing contours to merge (coincide) at that line — but they do NOT cross each other because there is still only one elevation at each plan position along the cliff base.

Contour Behaviour at Different Features

FeatureContour behaviour on plan
Overhanging cliffContours of DIFFERENT elevations CROSS each other
Vertical cliffContours MERGE (coincide) into a single line — different elevations, same position, but no crossing
Steep slopeContours are closely spaced but do not cross
Gentle slopeContours are widely spaced — no crossing at all

Why the Other Options Are Wrong

A — Vertical cliff: On a vertical cliff, the ground rises straight up. There is no horizontal protrusion. Every elevation between the cliff top and base maps to the same vertical line on the plan — contours at that line merge but do not cross. Merging is different from crossing: merging means multiple contours at different elevations coincide at one line; crossing means two specific contours at different elevations intersect at a single point.

C — Gentle slope: On a gentle slope, each plan position has exactly one ground elevation and contours are widely spaced. No crossing occurs.

D — Steep slope: On a steep slope, each plan position still has exactly one ground elevation — the slope is simply more inclined. Contours become closely spaced but never cross. Crossing requires the terrain to lean back past the vertical (overhang) so that two ground points at different elevations share a plan position.

Key Concepts for Students

  • Crossing requires two elevations at one plan position — only an overhang achieves this: Normal terrain (any slope) gives one elevation per plan point. A vertical cliff still gives one elevation per plan point along the cliff face (the face has zero horizontal extent). Only an overhang projects two different elevation surfaces onto the same plan area, producing the intersection.
  • Merge vs. cross — two distinct phenomena: These are frequently confused. At a vertical cliff, contours merge (many lines converge to one location). At an overhanging cliff, contours cross (two lines of different elevations intersect at a point). Knowing the difference between these two behaviours is essential for answering cliff-related contouring questions accurately.
  • Practical significance: Overhanging cliffs (common in limestone karst landscapes, volcanic crags, and glacially-carved cirques) pose serious mapping challenges. Standard plane-table or total-station surveys cannot directly observe both surfaces simultaneously. Photogrammetry or LiDAR is typically used to capture overhanging terrain accurately.