Which one is the CORRECT sequence for the temporary adjustment of the theodolite?
Try it first: pick an option, then read the explanation.
Detailed Explanation: The Correct Order of Temporary Adjustments
Every theodolite setup requires four temporary adjustments, performed fresh at every station. Performing them in the wrong order wastes time, since later steps can disturb earlier ones if done out of sequence.
Fig: The correct chronological sequence of temporary theodolite adjustments.
Why this exact sequence is correct:1. Setting: Fix the tripod legs firmly and roughly position the instrument over the station, at a comfortable working height.
2. Centering: Use the plumb bob/optical plummet to position the instrument's vertical axis precisely over the ground mark.
3. Levelling: Use the foot-screws to centre the plate bubble, making the vertical axis truly vertical.
4. Elimination of parallax: Focus the eyepiece and objective so the cross-hairs and target image are both sharp and do not shift relative to each other as the eye moves.
This order is logical because each step builds on a stable foundation from the previous one: you cannot level meaningfully before the tripod is set and roughly centred, and final focusing for parallax should be the very last fine-tuning step before observations begin.
Why the Other Options Are Wrong
A — Centering, parallax, levelling, setting: This places centring before setting (the tripod must be set up first before centring makes sense) and puts levelling almost last, which would require repeating levelling if centring is later disturbed.
B — Centering, setting, parallax, levelling: Again places centring before setting, and pushes levelling to the very end, which is inefficient and risks re-disturbing the centring achieved earlier.
D — Setting, levelling, parallax, centering: This places levelling before centring, but accurate levelling generally assumes the instrument is already roughly centred over the mark — doing it before centring can mean redoing the levelling step after centring shifts the instrument slightly.
Key Concepts for Students
- Memorise as: Set → Center → Level → Focus (parallax): A simple mnemonic ("SCLF" or "Set-Centre-Level-Focus") captures the logically necessary order, since each step assumes the previous one is roughly stable.
- Centring and levelling slightly interact: In careful practice, after levelling, a slight re-check of centring is sometimes needed since foot-screw adjustment for levelling can introduce a tiny horizontal shift — but the named four-step sequence remains the standard taught order.
- Why parallax elimination comes last: Since focusing only affects optical sharpness and not the instrument's physical position or levelness, there is no benefit to doing it earlier — it is correctly the final preparatory step before taking actual readings.