Surveying·MCQ explained

A tacheometer was set at a station and the readings were taken on two points, which were 100 m and 150 m apart and had staff intercepts of 3.98 m and 5.98 m, respectively. If an externally focusing tacheometer was used for the observation, then the values of focal length (f), stadia interval (i) and distance (d) between the objective and the vertical axis of the instrument could be:

Try it first: pick an option, then read the explanation.

Correct answer: C. f = 0.3 m, i = 12 mm, d = 20 cm

Detailed Explanation: Solving for Tacheometer Constants from Field Data

This is a classic tacheometric distance-formula problem. Two distance/intercept pairs let us set up and solve two simultaneous equations to find the multiplying constant K, which is then matched against the f, i values given in each option.

Step-by-step solution:
The tacheometric distance formula is D = KS + C, where K is the multiplying constant and C is the additive constant.

Equation 1: 100 = K(3.98) + C
Equation 2: 150 = K(5.98) + C

Subtracting Equation 1 from Equation 2:
150 − 100 = K(5.98 − 3.98)
50 = K(2.00)
K = 25

Since K = f/i (the stadia interval factor), we need f/i = 25. Checking option C: f = 0.3 m, i = 12 mm = 0.012 m → f/i = 0.3/0.012 = 25 ✔. This matches exactly.

Why the Other Options Are Wrong

A — f = 0.2 m, i = 12 mm: f/i = 0.2/0.012 = 16.67, not 25. Does not satisfy the computed K.

B — f = 0.3 m, i = 1.2 mm: f/i = 0.3/0.0012 = 250, far too large — an unrealistic multiplying constant for any practical tacheometer.

D — f = 0.3 m, i = 0.12 m: f/i = 0.3/0.12 = 2.5, far too small. A stadia interval of 0.12 m (120 mm) is also physically unrealistic for a telescope diaphragm.

Key Concepts for Students

  • Two unknowns need two equations: Whenever a tacheometry problem gives two independent distance/staff-intercept pairs, subtracting one equation from the other eliminates the additive constant C and isolates K directly — the standard technique for this class of problem.
  • Sanity-check units carefully: Stadia intervals on real instruments are typically a few millimetres (not centimetres or tenths of a metre). Always convert all given option units to the same base unit before computing f/i, as unit-mismatch traps (like option D's "i = 0.12 m") are common distractors.
  • K = 100 is the design target, not a universal constant: Most tacheometers are deliberately manufactured with f/i = 100 for easy mental arithmetic (see Q42). This question's computed K = 25 simply reflects the specific (non-standard) instrument described in the problem.