Engineering Materials·MCQ explained

For a given degree of hydration, the effect of increasing the water-cement ratio in concrete is:

Try it first: pick an option, then read the explanation.

Correct answer: A. To increase permeability

Detailed Explanation: Higher w/c Ratio Increases Permeability

Why A (Increase permeability) is correct: Permeability of hardened concrete is governed by the capillary pore system in the cement paste. For a given degree of hydration, a higher w/c ratio means more water was in the original mix relative to cement. Since hydration can only consume a limited amount of water (approximately w/c = 0.23–0.42 depending on degree of hydration), excess water remains in the paste as capillary pores. More excess water = larger, more interconnected pore network = higher permeability.

Water-Cement Ratio and Capillary Porosity

w/c RatioCapillary Pore VolumePermeabilityDurability
0.35–0.40Very low (<5% at full hydration)Very low (dense paste)Excellent
0.45–0.50Low to moderateLowGood
0.55–0.60ModerateModerateAcceptable for mild exposure
>0.65High (interconnected capillaries)HighPoor; not durable in aggressive environments

Mechanism: How w/c Controls Permeability

StepWhat Happens
1. MixingWater fills space between cement particles; w/c determines initial porosity
2. HydrationC-S-H gel fills some pore space; chemically combines some water
3. Residual capillary waterWater in excess of what hydration consumes remains as capillary pores
4. EvaporationCapillary water evaporates; pores remain empty; interconnected network
5. Higher w/c = more residual poresLarger, more numerous, more interconnected pores = higher permeability
Powers (1958) relationship (approximate): Capillary porosity (p) = (w/c - 0.36*α) / (w/c + 0.32) Where α = degree of hydration (0–1) At full hydration (α = 1.0): w/c = 0.40: p ≈ 0% (no capillary pores; essentially impermeable) w/c = 0.50: p ≈ 9% (some capillary pores; moderate permeability) w/c = 0.60: p ≈ 18% (significant porosity; high permeability)
  • Higher w/c ratio → more excess water → more capillary pores → increased permeability.
  • At w/c ≤0.40 with full hydration, capillary porosity approaches zero (essentially impermeable paste).
  • IS 456 limits w/c to 0.40 for extreme exposure to achieve maximum impermeability and durability.